8 Meters CNC Folder Machine

 8 Meters CNC Folder Machine

 Composition of machine

C).Specification

• General description
• The digital-control folder & slitter is flexibly used to fold and slit work piece which is unsuitable for traditional pressing system. The machine mainly consists of machine body, clamp unit, folding equipment, digital-control backstop, slitting system, work piece supporting equipment, hydraulic system and PC control system,ect.  
• The folding machine can bend different kinds of section automatically.
• Production Process flow(For 8meters Folder and slitter):

• Primary technology parameters

1. Max. Folding length             6000mm

2. Throat depth:                   800mm

3. Max. folding thickness          1.50mm steel @ 250mpa

2.00mm soft aluminum

1.00mm stainless steel

4. Max. slitting thickness:          0.3-1.5mm steel @ 250mpa

1.0-2.0mm   soft aluminum

0.5-1.0mm   stainless steel

5. Max. folding angle:             125 degrees

6. Weight                        Approx. 6000kg

7. Slitting speed                 About 800mm/sec.

8. Slitting mold                   rotary slitter

9. Control system                 PC with 12’’ LCD

10．Electric condition            380V/3Phase/ 50HZ (As customer require)

• General Parameter of Machine

1. Feeding width: Max. 1000mm
2. Driven by Servo motor, pump motor: 0.75KW
3. Working length: 6000mm
4. Press clamp:7 units
5. Weight:Approx. 6000 Kg
6. Pressing power:pump motor for hydraulic station7.5KW(Located inside)
7. Bending range:0-125 degree
8. Depth of throat:800 mm(Max. working width of material in clamp)
9. Hinge:7 groups
10. Total power:9.35KW (7.5KW+1.1KW+0.75KW)
11. Outline dimension(Length×Width×Height):6300×1700×1500 (For reference only)

• Slitting Device

12. Type Of Blade : Slitting wheel
    Diameter:∮80 (Enough)
    Material:Cr12MoV
13. Drive system:Motor driving, 1.1KW
    Guiding device:Steel rope circling
14. Slitting speed:Approx.0.8m/s
15. Slitting distance: Through steel rope circulation.

• Bending & Slitting Device

16. Max. Bending thickness     1.0mm
17. Max. Bending length         6000mm
18. Max. Slit thickness           1.0mm

• Hydraulic power pack

19. Capability:Max.16MPA
20. Capacity of oil tank: 170L
21. Power source:Hydraulic

• PLC Control System

22. System:Siemens PLC Control
23. Numerical control locating system:Siemens PLC Control
24. Operating table:Touch Screen
25.  Angle programmer:Encoder test
26. Slitting control:Manual
27. Emergency stop: e-stop button+ e-limit+ foot switch (right heavily)

• SAMPLE AS:

Procument Aspects

    Our machinery can produce the roof tile , roof cladding, wall and roof cladding, glazed roofing, Corrugated roofing, wave roof panel, double layer roof panel,roof plate, roof sheet, floor deck , steel silo, grain bin, highway guardrail, door frame, door guiderail, door panel, cable tray, CZ Interchangeable PURLIN,C,Z SIgma PURLINS, Stud and track, L ,V ,Slotted angle , PU Sandwich Panels and etc.

Contact Us   

We also produce other Roll forming machines :

• PU sandwich panel production line
• Purlin Roll Forming Machine
• Steel Silo Roll Forming Machine
• Gutter machines and downspout machines
• Metal roofing /decking/cladding roll forming machines
• Roof tile roll forming machines
• Door & window frame roll forming machines
• Guide rail roll forming machines
• Upright post roll formers
• Stud and track forming machines
• T-bar forming machines
• Guardrail roll forming machines
• Cable tray roll forming machines
• Roller shutter manufacturing lines